How To Keep Warm While Saving Energy?

The winter period is conducive to peaks in energy consumption. The cold outside encourages us to create a friendly atmosphere inside. We compensate for the lack of light with warm lighting. To relax, nothing beats a good hot bath. It may seem paradoxical, but winter is the ideal season to reduce your energy bill.

Insulation, The Best Anti-Waste Weapon

The more you block out the cold outside, the more you reduce your heating needs. Insulation is, first and foremost, a matter for specialists. Speak to a professional who, thanks to his expertise and sound advice, will help you make the right choice.

Don’t wait for the cold to set in to insulate your home. Plan the work before winter. Effective roof, wall, and window insulation can cut heating costs by almost half. Discover all the useful information in our article dedicated to insulation.

To prevent heat from escaping through cracks and gaps, use insulating gaskets. The investment is insignificant.

Placing a reflective film behind the radiators will prevent heat loss through the exterior wall.

Insulate the pipes in unheated rooms, such as the garage or storage room.

Lighting: LEDs, more LEDs, nothing but LEDs

In winter, we compensate for the lack of light with artificial lighting. Hence the importance of choosing energy-efficient lamps and bulbs. Lighting accounts for approximately 20% of annual energy consumption.

Replace your old incandescent lamps with LED bulbs, which are much more attractive in terms of consumption, lifespan, and color temperature.

Install presence detectors: with a presence detector, the light switches off automatically as soon as the person leaves the room. Thanks to this system, the lamps, therefore, never burn unnecessarily.

Use dimmers: a dimmable lamp consumes less energy than a bulb whose intensity does not vary. Rather than using the dimmer permanently, it is better to reduce the wattage of the bulb.

Are you a fan of Christmas lights outside and inside your home? Know that traditional garlands and other Christmas lights consume, on an annual basis, as much energy as an average freezer. By using LED lighting for your end-of-year decoration, you will save up to 75%.

Did you know that as a Luminus customer, you benefit from discounts of up to 60%? Visit our online LED store without delay. Learn more about Trading Carbon Credits here.

More Energy-Saving Technologies?

Do you want to be even more eco-responsible? Focusing on sustainable energies with e360 Power for example will reduce your consumption throughout the year. In consultation with a specialist, determine the measures best suited to your home and your lifestyle. Do not be put off by the investment, which is profitable in the vast majority of cases. The possibilities are endless:

Solar panels

Home Battery

solar collector

heat pump

read more

Is Forex Trading Profitable?

Forex is an abbreviation of trading in foreign exchange. Trading in Forex can be a lucrative option. Many people today are drawn to this profitable market, yet most of them leave the game. Forex trading is not for everyone. It requires persistence and continuous upgradation in understanding and abilities to become successful in trading. If you are hunting for more information on forex strategy tester, look into the above site.

Most traders are familiar with brokerage and forex brokers. firms as it is not possible to trade forex without these brokerage firms. Forex brokers are companies that allow individuals to take part in the foreign exchange market by allowing them to buy and sell currencies. These people are called “traders.” Are you aware of the concept of white-label brokers in the world of foreign exchange? The majority of traders aren’t aware of the concept of white-label brokers and what it entails. Let me help you understand this. Browse the following website, if you are hunting for more details concerning social traders tools.

White labeling refers to the concept of collaboration in which one company creates products or services, while the other company sells products or services under its brand. This system functions similarly to an affiliate network. It is achieved through an arrangement whereby an infrastructure and solution provider sells them to the new brokerage company’s owner for a price. With the assistance of a white-label provider, a new brokerage firm can access the global financial market through its own brand name, increasing the brokerage’s potential revenue and client base. The supplier of the solution could be the developer, or can serve as intermediary between the developer and the brokers.

For commissions, white-label brokers utilize the infrastructure and licensing provided by white-label providers. Any issues with infrastructure or technology faced by white-label brokers are their responsibility.  A large number of white-label brokers are now operating within the field and are providing services to traders. Visit the below mentioned website, if you are seeking for more information on auto trading.

Each broker offering investment options has both merits and drawbacks. When dealing with them, traders should be mindful of the level of security provided by these brokerage firms, the regulations in place, and the costs that are associated with transactions. These are the most important factors that a trader should take into consideration. There could be subtle differences depending on which broker provides the security features. Many brokers offer two-factor authentication as well as other security options to guard customers accounts from intrusion. A trader must determine the type of trader he or she is and what their objectives are when trading currencies.

read more

Standard Penetration Test: Overview

Standard Penetration Test: Overview

Standard Penetration Test (SPT) is one of the main methods of determining in situ soil structure, bearing capacity, and other engineering properties. In addition, the angle of shearing resistance of cohesionless soils and the unconfined compressive strength of cohesive soils can also be derived from it. Invented in the USA back in 1925, the penetration test was standardized in terms of required equipment and procedure to compare test results from different investigations.

The penetration test is carried out in a borehole, thus providing representative soil samples.

Read on to find out all the essential information about the Standard Penetration Test, its purpose, procedure features, benefits, and drawbacks.

What is the Purpose of the Standard Penetration Test?

The issue of weak foundations of different structures is usually caused by poor investigation of the properties of the soil used for it. Equal settlement of any building or construction is only possible on the high-bearing capacity soil.

Like any other penetrometer test, SPT is an essential tool for engineers on construction sites. Thus, construction stability and a security engineer salary largely depend on their ability to conduct a standard penetration test.

Primary purposes of SPT:

  • Extraction of soil sample for identifying its type and nature and multiple depths;
  • It allows for determining soil penetration resistance at different levels to identify its properties.

Standard Penetration Tests – The Procedure

Before diving into the description of the SPT procedure, it is essential to note that this test requires precision and specific tools. In addition, the level of engineer’s experience and care on site is crucial for accurate and reliable results.

The procedure of the standard penetration test

  • The required sampling depth borehole is pre-drilled (the sample tube is 50.8 mm in diameter and around 650 mm in length).
  • The tube is driven into the soil with an anvil of 63.5 kg, dropping precisely from 0.76 m height.
  • First, the sampler is driven 150 mm into the pre-drilled hole (counting from its bottom). Then, the n value of anvil blows required to move it another 300 mm is recorded as an N30 count.

Both drilling and stabilization of the borehole require a high level of care.

Factors like the force/energy of the drill rod, its impedance, and the drilling method have an impact on the results.

Relative Density and Bearing Capacity of The Soil

The bearing capacity of the soil represents the maximum load per unit area, which it can support without moving. This factor is closely connected with the soil type, which depends on its relative density. There are five main types: very loose, loose, medium, dense, and very dense soil. The difference is in the bulk density that can be found within 1600 kg/m3 (very loose) and 2100 kg/m3 (dense). Everything that exceeds these limits is called “very dense soil.”

Test also accounts for the nature of the soil, which can be cohesive, cohesionless (non-cohesive), or rocky.

Correlations in Penetration Test

Before using the values obtained from the penetration test in empirical correlations, the value of N has to undergo IS 2131 – 1981 correlations:

Dilatancy Correction

Clays and fine sands below the water table tend to have pore water pressure that drives the resistance of the soil to penetration up. Therefore, if the n value is higher than 15 on sands, the following correlation is required:

Nc = 15 + 0.5 (Nr -15)

Nr is an observed (recorded) value, while Nc is the corrected one.

Overburden Pressure Correlation

Overburden pressure has been proven to affect the standard penetration resistance. The measured n value differs depending on the depth as the confining pressure increases. Hence, the following correction is necessary:

Nc = Cn*N

Cn here is the correction factor for the overburden pressure.

Standard Penetration Test – Pros and Cons

SPT is a reliable and widely used penetrometer test. First, however, it is essential to outline its main benefits and drawbacks:


Standard penetration test has the following advantages:

  1. It is simple and cost-effective
  2. Allows collecting samples for further investigations of the soil
  3. If carried out carefully provides an insight into the actual soil behavior on the construction site
  4. It applies to multiple soil conditions.


As for the disadvantages:

  1. The reliability of the results strongly depends on the competence of the operator
  2. Limited applications for rocky soils
  3. SPT is relatively time-consuming.

Closing Thoughts

A standard penetration test is an effective tool for determining the crucial properties of the soil used for construction purposes. Data derived from carefully conducted SPT allows understanding of the type and nature of the soil. The test is pretty simple but requires precise equipment and experienced operators to get the most accurate results.

read more

Headings to Get 100% Guaranteed TikTok Fans on Your Profile

Tolerating you needed to make a better put over the stage, as TikTok, you really expected to do excellent things. Possibly you marvelously present your image or advance your work with noteworthy frameworks like purchase authentic TikTok Supporters. If you are searching for How to Get 100% Valid TikTok Partners, you should look at the associations to purchase ensured TikTok devotees.

Get 100% Genuine TikTok Partners

It’s an astounding strategy for getting popularity, and all the while, it works and is only genuine to utilize. Get each of the partners genuine while buying this with some solid source, as some are making it a coercion business. A genuine source will dependably give you penny percent true people as your consistently extraordinary fans. It will firmly maintain your followings, and when they share your substance to their profiles or the companion pack, they dispatch a free, special mission. So pushing you best quality substance and accepting fans on its explanation could be an ideal arrangement over accepting that social classes will contact you in the heap of substance.

Put forth an attempt not to Hang on For Right Second!

Somebody said each second is the right second to begin your ideal thing. Get 100% Genuine TikTok Fans by making an openness of your substance over the web with the assistance of notice or by implication saying purchase the adherents to push your hair-raising substance.

Become capability of the TikTok and get cash as an impact, so purchasing genuine sweethearts would be awesome. Make your substance on TikTok, and its explanation may truly assist you with getting enthusiasts in the trading of irrelevant money related worth.


Purchase attested partners who respect your substance or brand. Take an interest in the endorsement and secure more cash in the wake of being a web sensation. Investigate each of the terms prior to making any exchanges to stay away from any past compromise situation.

read more

New York City’s Famed Tobacco Shop Shutting Its Doors

The Midtown Manhattan-based Nat Sherman Townhouse, 90-year old famous tobacco shop in New York, is closing its doors in September. To learn more about the topic and know where you can find a reliable and low cost tobacco merchant account, read the lines below.

Nat Sherman Shutting: Online Tobacco Merchant Account You Need

Nat Sherman, the 90-year-old company, has decided to close its doors. This is a famous wholesale cigar business in New York. Its iconic New York City retail location is called the Nat Sherman Townhouse.

Unfortunately, COVID-19 has created huge problems for the retailer. In fact, the coronavirus has immediately and negatively affected many companies’ sales. Namely, 43.7% of the shops having participated in a recent survey report their 2020 sales have declined as compared to the previous year. The sales of 14.9% have remained flat.

So, Nat Sherman is shutting its doors on September 25. This has been a place offering all types of top tobacco products, including hand-rolled cigars and cigarettes of premium quality.

If you’re a merchant seeking a reliable and cheap online tobacco merchant account, you just need to apply to a reputable high risk credit card processor in the country. The right high risk merchant account provider in the country will guarantee the most reliable and cheapest merchant processing services you need for accepting payments online.

After Nat Sherman Is Closed

Nat Sherman International includes not only the retail store but also a wholesale company selling premium cigars and pipes. The cigarette portfolio is being managed by a different Altria division and doesn’t bear the impact of the closure.

Nat Sherman has its own brand of cigars. Now, the brand and its Timeless line aren’t going to continue. However, Altria won’t stop the production and marketing of Nat Sherman-branded cigarettes, according to one of the spokesmen of the company.

So, the famous Nat Sherman Townhouse in New York City, which has been among the places that make New York the greatest city in the world, is shutting in September. Nat Sherman has been selling all kinds of reputable tobacco items, such as hand-rolled cigars and cigarettes of premium quality.

Author Bio: Blair Thomas has been a music producer, bouncer, screenwriter and for over a decade has been the proud Co-Founder of eMerchantBroker, the highest rated high risk merchant account processor in the country that offers the most secure and cheapest online Tobacco merchant account in the space. He has climbed in the Himalayas, survived a hurricane, and lived on a gold mine in the Yukon. He currently calls Thailand his home with a lifetime collection of his favorite books.

read more